P15S-25-1 LED Headlight 6 Volt 30 SMD

P15S/3 T19 or P15S-25-1 base led headlight. This 6 volt headlight works both positive ground and negative ground vehicles, motorcycles and scooters. There is only one filament. Built with 24 quantity side firing high quality 3030 chips. 6 3030 led chips for forward firing plus a lens. For a total of quantity 30 of 3030 chips. Long life up to 30,000 hours. Full 360 degree illumination. The P15S-25-1 has one tab or claw on the ring. P15S-25-1 base the diameter is 15mm. The ring is 20mm. The overall length is 27mm. Up to 21 Watts LED power. The overall width is 18mm except for the ring which is 20mm. Made with aviation aluminum to keep the led's cooler so they last longer. Operates from 40c-70c versus a Halogen bulb operates around 160c. Up to 700 Lumen output. Please clean your reflector and lens for maximum light output. Comparable to a 50 CP headlight. The led compares to a 25 to 55 Watt incandescent or halogen light bulb. Since this bulb has one filament this bulb has one light output on and off. The led headlamp has a low profile for easy replacement of your old incandescent light bulb. Available in white 6000K. The flanged P15S/3 has one contact on the bottom and two bayonets are parallel. Since this bulb is a pre focus P15S-3 base it is comparable to the bulb you are replacement. This bulb works great in motorcycles, scooters, tractors and snow mobiles. For automobile, motorcycle fog lights, headlights, daytime running lights. For some vehicles and motorcycle's and scooters' a load equalizer may be required. Compatible with: Floesser P15S-3 T19 P15S/3 P15S-25-1 P15S251 Eiko 635J 48046 Light Bulb Single Contact Prefocus Flanged (P15s-3) A519 Vintage Snow molbile Headlight Bulbs 660j A7048 12v60w P15s-3 1151 H6 Single Claw