Download or Print Catalog of LED Lights, LED Bulbs and LED Lamps for Household
BA15S for 1129 or 1156 Socket with pigtail wire. The socket is made of durable metal materials. The wire is 18 awg stranded wire. The diameter is 15mm with even bayonets and a single contact. Can be used for positive ground or negative ground. For voltages from 0 to 24 volts. CE and Rohs listed.
B22 male to GZ10 female socket converter. Perfect for those that are looking to use a GZ10 with an existing B22 fixture/socket. CE and Rohs listed. See product detail for warranty period. Rated 2 amps @250VAC, for a total of 500W per socket.
B22 male solder-able copper cap. Made of copper for long life reliable electrical connections. CE and Rohs listed. Works great to replace corroded, broken, worn out B22 male base.
Use this B22 male to E12 female screw base. CE and Rohs listed. Use this converter instead of replacing the whole fixture.
B22 male solder less iron cap. Use this cap to replace broken, short circuit, corroded base. CE and Rohs listed. Made of iron for long life reliable electronic connection. Comes with both the B22 base and 2 solderless B22 contacts. Just insert the included contacts into the base with the wires, no solder or special crimping tool needed.
B22 male to dual E27 female Y-shaped socket converter. Great for those that want to use standard Edison screw base bulbs with a B22 socket. No special tools needed. CE and Rohs listed. Gives you twice the light output for one socket.
BA15D socket with 6 " wires. Socket is made of plastic and metal materials. After time the sockets get corroded or just fail, it is good to replace the old socket with a new socket. CE and Rohs. Works with voltage from 0 Volts to 24 Volts. Max voltage 24 Volts. Max current 1.46 Amps. Max power 35 Watts.
BA15D Copper Plating Solderable. Made of copper plating for long life. CE and Rohs listed. This BA15D cap uses solder to connect wires to the terminals. length=.742; top width=.655; extruded base=.487; connector holes=.260; extruded sides=.666.
BA15D socket with stand and wires. Very rugged socket and the stand is real strong. BA15D bases fit this socket. There are 2 wires plus and minus to make the light illuminate at one level or two levels depending on how the socket is wired as a #1142 or #1158. This is for bulbs that the bayonets are even.
Surface mount socket 1142 BA15D with wires. Use this socket to replace corroded, rusted or broken socket with a new socket. The wires are about 6 inches long. The socket has two contacts. The body is 15mm diameter. This socket is for bulbs with the bayonets are equal height. This socket works great for #1158 and #1142. CE and Rohs listed.
Compatible with:
1142
#1142
1158
#1158
BA15D Socket with pigtail. BA15D Socket with wires. Plated socket with two wires for negative and positive connection. Since it is BA15D the bayonets are same height. BA15D socket allows for three circuits either one level of brightness such as a 1142 or two levels of brightness such as a 1158. CE and Rohs.
BA15D Socket with wires and surface mount bracket. Plated socket with two wires. Since it is BA15D the bayonets are same height. The bracket is designed for surface mount installation and has two holes for mounting screws. Accepts BA15D bulbs that have two contacts for either single filament such as 1142 or dual filament such as 1158. The socket has three circuits the base and two contacts. Use for AC or DC up to 220 Volts. The socket can handle up to 2 Amps@ 24 Volts. The socket is rated up to 48 Watts of power. Socket is made of iron plated with nickel. The wire is stranded 20 AWG. The contacts are made from brass. CE and Rohs.
BA15D male to GZ10 Converter. Rated 500 watts, 250VAC, 2 amps. Made of flame retardant PBT and copper material. UL, CE and Rohs certified.
BA15D Copper Plating Solderable. Made of copper plating for long life. CE and Rohs listed. This BA15D cap uses solder to connect wires to the terminals. length=.742; top width=.655; extruded base=.487; connector holes=.260; extruded sides=.666.
BA15D male to GZ10 Converter. Rated 500 watts, 250VAC, 2 amps. Made of flame retardant PBT and copper material. UL, CE and Rohs certified.
BA15S socket with 6 inch wires. The socket is made of plastic and metal materials. The socket as 1 contact, which fits 1129 or 1156 or BA15S. Its good to replace a corroded or broken socket with a new socket.
BA15S for 1129 or 1156 Socket with pigtail wire. The socket is made of durable metal materials. The wire is 18 awg stranded wire. The diameter is 15mm with even bayonets and a single contact. Can be used for positive ground or negative ground. For voltages from 0 to 24 volts. CE and Rohs listed.
BA15S socket with stand, for 1129 or 1156 bulbs. This BA15S socket comes with a mounting bracket, great for lighting projects. With only one positive wire and the base used as the negative ground, it makes installation quick and easy. Measures ~ 6.10" in total length. This is a good universal socket for all BA15S or 1156 socket retrofits or installation. This socket is very durable. The socket accepts 15mm diameter, even bayonets BA15S with single contact on the bottom. The copper plated socket helps the socket last a long time. This is a 1156 BA15S bulb holder for solid long life contact. These sockets works great for older classics and vintage cars, trucks and motorcycles to replace the old sockets with new sockets. This is a bayonet single contact socket. Works as a pair as turn signal sockets. Works with either led or incandescent bulb. The socket has one contact.
BA15S with 6" Wire Surface Mount Socket. Easy to install on a flat surface. BA15S means one or single contact in the socket with one wire. Used for 1129 and 1156 single filament bulbs 15mm base. CE and Rohs listed.
BA15S 1129 or 1156 male solder-able copper base cap. Made of copper plated material for long life. Use this lamp holder socket to replace the cap with a new cap for years of reliable operation. The base diameter is 15mm and has even bayonets and a single contact. CE and Rohs.
Use this BA9S female socket with stand to mount a BA9S l.e.d. light. CE and Rohs listed. The socket has two solderable tabs, eyelets to properly solder wires to the socket.
BA9S socket with pigtail wire. Has spring, and connecting fixture and socket metal piece. Works good when working in small area to install or replace BA9S socket/fixture. The wire length is about 4". The wire gauge is approximately 18 AWG, stranded copper. The socket made of plated materials. CE and Rohs. The socket accepts 9mm BA9S bulbs.
Very rugged BA9S female socket with solderable tabs. Each tab has two holes for soldering wires and mounting the socket into non conductive surface. Approximate size is .68in (height) x .38in (diameter of Socket) x 1.16in (width with Tabs). This female socket will accept BA9S bulbs that are 9mm in diameter. CE and Rohs. Great for low voltage applications from 0 to 48 Volts AC or DC.
BAY15D Socket Solder Terminals. Made of copper plated materials. Has two bayonets one lower, one higher, has two solder-able contacts at the bottom of the cap. CE and Rohs listed.
BAY15D Socket with Stand. This 1154 or 1157 socket comes with a mounting bracket, great for lighting projects. With two positive wires and the base used as the negative ground, it makes installation quick and easy. Measures ~ 6.10" in total length. The bayonets are offset and has two contacts for tail light and brake light. This 1157 BAY15D bulb socket holds a 1157 LED bulb for long contact without issues. This 1157 socket is low profile and has a stand that you can mount to the vehicle negative chassis or positive chassis vehicles, motor cycles, E-bikes, mopeds, scooters, trucks. Great for marine use due to the heavy duty metal and metal plating for hard marine environment. Product dimensions approximately .85" diameter, 1.18" for the stand and 1.19" for the body, total length including the wires are 6.10". The stand is offset 0.325" from edge of the socket or 0.650" from the centerline.
BAY15D Socket Female Socket with pigtail. Use this BAY15D socket with 6" inches 2 wires. A 1154 or 1157 has the bayonets are offset and have two contacts on the bottom. Made of plated metal materials for super long life. Can be used either positive ground or negative ground. Operates from 0 to 24 Volts. CE and Rohs listed.
BAY15D socket with 6" wires. After time the sockets get corroded or just fail, it is good to replace the old socket with a new socket. Socket is made of plastic and metal materials. The BAY15D has a offset bayonet. The offset bayonet is used for 1154 and 1157 bulbs. The socket accepts 15mm bases that have a offset bayonet. The "D" stands for dual so you will have a tail light and a brake light. The black wire is ground, the yellow wire is taillight and the red wire is brake light. CE and Rohs.
Cigarette Lighter Plug male 12V DC. Use this cigarette lighter to install led lights for your car, boat or RV. The customer has to install the pigtail wires to hook up your leds, no wires included, requires some soldering. There is a LED power indicator to show when there is power applied to the plugs electrical contacts. Operating voltage 12V DC. Operating current up to 5A. The shell is made of plastic. Built in 3 Amp glass fuse that is included in the tip. CE and Rohs.
E12 male to E10 female Converter. CE and Rohs listed. Made of copper material and heat shrink. There is no electronics just passes the two conductors from one base to another base. Save time and money by using this converter instead of replacing the light bulb. Part dimensions: length= .796"; top (outside)=.610; inside (across)=.383"; bottom=.428.
E10 male to E17 female Converter. CE and Rohs listed. Made of copper and heat shrink materials. There is no electronics in this converter it just passes via two conductors between the the two bases E10 and E17. Save time and money by installing this converter than replacing the light bulb or fixture.
E17 male to E11 female converter. Use this adapter to convert from E17 socket and E11 light bulb. Save time and money by installing this converter versus replacing the fixture or changing the light bulb. CE and Rohs listed. There is no electronics in this converter just two conductors. This converter works great instead of purchasing and replacing the fixture and/or led light bulb. The converter is constructed using a E17 male screw with a E11 female screw is soldered together the heat shrink is applied.
E10 male to E11 female Converter Extender. CE and Rohs certified. Made of copper and heat shrink materials. Save time and money and use this converter instead of replacing expensive fixture or to increase the bulb height. Voltage range 0-250 V. Max Current 4 Amps. Max power 1000 Watts. Made of copper. The youtube title is incorrect says E10 male to E10 female which is wrong, it is aE10 male to E11 female.
E11 Screw base male To E17 Screw base female con. Rated 250VAC@2 amps. UL, CE and ROHS listed. Made of flame retardant PBT and copper materials. Save time and labor by using this adapter than replacing the whole fixture. No special tools needed.
E11 male to E14 female converter. CE and Rohs listed. Made of copper and heat shrink materials. There is no electronics just two conductors to convert the base from E11 to E14. Save time and money and use this converter instead of replacing the light bulb or fixture.
E12 male to E26-E27 female ceramic converter. CE and Rohs listed. Use this ceramic converter for hot light bulbs or for a reliable converter. Save time and money using this converter versus replacing the whole fixture.
E11 male to E26/E27 male converter. CE and Rohs listed. This is version A because the product is made on a machine versus hand made. Save time and money by using a replacement converter instead of replacing the fixture.
E11 male to E10 male converter, CE and Rohs listed. Use this converter instead of replacing the light bulb or the fixture. Made of copper and heat shrink materials.
E11 Male Solderable Cap. Made with copper plated nickel. Maximum voltage 250V. Maximum current 1 Amp. Maximum wattage 250 watts. CE and Rohs.
E11 Male Screw To E12 Female Screw Converter Adapter. Body and contact material copper. Heat shrink insulating. Measures .54 inches wide and, 1.10 inches in length. Use this adapter to convert E11 screw base to E12 screw base and not have to change out fixture or replace light bulb to new base.
E11 Screw base male To E17 Screw base female con. Rated 250VAC@2 amps. UL, CE and ROHS listed. Made of flame retardant PBT and copper materials. Save time and labor by using this adapter than replacing the whole fixture. No special tools needed.
E12 Screw Base Socket with solderable tabs that have a hole to solder the wire easily. 1 per package.
E12 Socket with pigtail. Candelabra Rated up to 240 volts AC@0.125A. Perfect for rewiring or adding a new light anywhere. Made of plastic and copper materials. The wire is about 15cm long or 6". CE and Rohs.
E10 Screw Base Socket W/Solderable Tabs. This socket has two solderable tabs one for positive and one for negative. Each Tab has one hole. Socket has gold/copper color plating to resist rust and corrosion. Approximate size is .50in (height) x .42in (diameter of socket) x .71in (width with tabs).
E12 female socket with wires. UL, CE and rohs listed. Made of ceramic for long reliable life. The ceramic is white in color. This saves time and money by replacing the socket and not the whole fixture. Come with 1/8F ips hickey.
Use this E12 screw to E12 screw extension when you are in a tight location. Rated 250VAC@2 amps, 500 watts. CE and Rohs listed. Great to use this extension than to replace the fixture or fixtures. No special tools needed. As reliable as using the default bulb for the fixture.
E12 (male) Screw To E17 (female) Screw Converter Adapter. Body and contact material copper. Heat shrink insulating. Use this adapter to convert E12 screw base to E17 screw base and not have to change out fixture or replace light bulb to new base. Rated up to 6 Amps and 250V. CE RoHS & UL certified.
E12 male to E10 female Converter. CE and Rohs listed. Made of copper material and heat shrink. There is no electronics just passes the two conductors from one base to another base. Save time and money by using this converter instead of replacing the light bulb. Part dimensions: length= .796"; top (outside)=.610; inside (across)=.383"; bottom=.428.
Use this E12 screw to E12 screw extension when you are in a tight location. Rated 250VAC@2 amps, 500 watts. CE and Rohs listed. Great to use this extension than to replace the fixture or fixtures. No special tools needed. As reliable as using the default bulb for the fixture.
E12 (male) Screw To E17 (female) Screw Converter Adapter. Body and contact material copper. Heat shrink insulating. Use this adapter to convert E12 screw base to E17 screw base and not have to change out fixture or replace light bulb to new base. Rated up to 6 Amps and 250V. CE RoHS & UL certified.
E14 female socket lamp holder. CE and Rohs listed. Made of flammable resistant materials. Has two holes for mounting screws not included. Save time and money by replacing this lamp holder instead of replacing the whole fixture or LED light bulb. length=1.120"; base width=1.577"; top width= .662; connection width=.393"; mounting hole width=1.254".
Compatible with:
European E14
E14 ceramic socket with wires. CE and Rohs listed. Made of ceramic and two screw terminals. Since it is made out of ceramic it is very rugged and reliable. Up to 250 VAC @ 2 A. Rated up to 500 Watts. The wires are about 9" in length.
E14 female socket with wires. CE and Rohs. Made of ceramic for long life. Great for bulbs that operate at a hot temperature. The wires are about 8" in length. This is a E14 lamp socket to work with E14 led or incandescent bulbs.
E14 male to GU10 female. CE and Rohs listed. Rated 2 amps@250VAC/500 Watts. Save valuable time and money by using this converter instead of replacing the entire fixture.
E14 male to E11 female Adapter. CE and Rohs certified. Made of metal/copper and plastic materials. Save time and money by using this converter versus replacing the fixture or light bulb. Up to 2200 Watts. Up to 240 VAC. Up to 10 Amps@220 VAC.
E14 male to E17 female adapter. CE and Rohs listed. Made of copper metal and heat shrink materials. Use this converter instead of replacing the light bulb or fixture.
E14 male to E26-E27 female ceramic converter. CE and Rohs listed. Use this ceramic adapter to hold a hot light bulb that would melt a normal plastic converter, or use this rugged converter to hold you led light bulb with zero worries.
E14 male to E10 female converter. CE and Rohs listed. Made of metal and heat shrink materials. Easier to use this adapter than replace the whole fixture or be able to use a special bulb with this converter.
E14 male solder-less copper base cap. Use this socket to replace broken lamp holder sockets. Made of copper for long life. CE and Rohs listed. Rated up to 2200 Watts. Rated up to 240 VAC. IP 5. Size 2cm by 1cm. View larger photo for the center solder-less plug. -30c to 170c temperature rating.
E14 male copper solder-able base cap. CE and Rohs certified. use this socket to replace broken, corroded or worn out sockets. The base is made of copper for long life.
E14 Male to B22 Female Socket Converter. Great for those that want to use B22 base bulbs in an E14 fixture without needing to replace anything existing. CE and Rohs listed. No special tools needed.
E14 Male to G9 female ceramic socket converter. Great for those that are wanting to use G9 bulbs without replacing the entire existing fixture. Ceramic build is great for heat dispersion, to help ensure the bulbs last as long as possible. CE and Rohs listed.
E14 Male to BA15D Female Converter Socket. Great for projects, small lighting applications, home improvement, etc. Use if you are in need of BA15D lighting, but do not want to replace the existing fixture. CE and Rohs listed.
E14 male to 2xE14 female converter. Great when wanting to get more light out of your fixture without getting an entirely new fixture. CE and Rohs listed. No special tools needed.
E14 male to GU10 female. CE and Rohs listed. Rated 2 amps@250VAC/500 Watts. Save valuable time and money by using this converter instead of replacing the entire fixture.
Use this E17 Screw base that has solderable tabs for your specialized lighting applications. Rated Current: 5A Rated Voltage: 0V-380V. Up to 1900 Watts. CE and Rohs. Approx.: 0.94' x 0.75".
E17 screw base to E11 screw base converter/adapter. Rated 250VAC/2amps//500 watts. UL, CE and Rohs listed. Great to use when you do not want to replace the fixture, saves time and money. Made of flame retardant PBT and copper materials.
E17 male solder cap. This cap is made of copper for long life reliable electrical connections. CE and Rohs listed. Use to replace rusted, corroded or just a old lamp holder socket.
E17 screw base to E11 screw base converter/adapter. Rated 250VAC/2amps//500 watts. UL, CE and Rohs listed. Great to use when you do not want to replace the fixture, saves time and money. Made of flame retardant PBT and copper materials.
E17 male to BA15D female socket converter. Use this adapter to convert from E17 male to BA15D instead of replacing the fixture. CE and ROHS listed. length=1.718"; top width=.614"; bottom width= .602".
E17 male to E26 female ceramic converter. CE and Rohs listed. Made of ceramic and metal materials. There are no electronics in this converter just two conductors that convert the base from E17 base to E26 base. Save time and money by using this converter versus replacing the light bulb or fixture.
E17 male to E11 female converter. Use this adapter to convert from E17 socket and E11 light bulb. Save time and money by installing this converter versus replacing the fixture or changing the light bulb. CE and Rohs listed. There is no electronics in this converter just two conductors. This converter works great instead of purchasing and replacing the fixture and/or led light bulb. The converter is constructed using a E17 male screw with a E11 female screw is soldered together the heat shrink is applied.
E17 male to E10 female Converter Adapter. 0V-277V AC or DC. Max 4A@100VAC. Max 400W. Heat shrinkable sleeve. Made of copper. CE and Rohs.
E14 male to E17 female Adapter/Converter. Body and contact material made of copper. Use this adapter to convert your E14 screw base to an E17 screw base and not have to change out fixture or replace light bulb to new base. Approx.: 1.42” x 0.79”. Rated up to 6 Amps and 250V or 1000 watts. CE, RoHS certified.
This product works great to adapt your microwave to E26 E27 versus the E17 or other appliance so you can use a standard E27 bulb. The approximate size is 2.16in x 1.42in. The rated current is 10 amps. The rated voltage is up to 220 volts. Works with low voltage such as 12 volts. The rated power is 2200 watts. CE approved.
E26 or E27 medium base Edison female socket F519. This socket has a mounting bracket so you can properly mount the socket to the fixture or wall. The socket is made of porcelain. The VDE mark is a certification that indicates a product meets safety and quality standards for electrical, medical, and information technologies. The socket has a VDE mark. The socket also has a S Mark. The socket has D Mark. The D Mark is owned by UL. The socket is also VEM marked. The bracket is 0.3135". The hole diameter is 0.1355". The hole to hole spacing is approximately 0.4725". The maximum diameter of the socket is 1.54" and the length of the socket is 1.776".
Use this three way light fixture E27 female to add light to hallways, porches, walk ways. Adjustable to make sure lighting is illuminating the intended area. CE and Rohs listed. Works great with L.E.D. lighting so you can use low power led lights to save power.
F519 female E26/E27 socket with screws to attach wiring. Made of ceramic and copper materials. CE and Rohs listed. Rated for use up to 4A@250 VAC. The VDE mark is a certification that indicates a product meets safety and quality standards for electrical, medical, and information technologies. The VDE mark is often required by law in many countries and is important for building customer trust. The S mark S Mark Certification, demonstrating compliance with legal European electrical safety requirements via third-party testing. The D Mark is A voluntary Danish electrical safety mark that indicates a product complies with European electrical safety standards. The D Mark is owned by UL and can be used to build trust with customers and as documentation for CE and UKCA marking. The socket is also VEM marked. Come with two screws to connect the wires to the socket. Compatible with either E26 or E27 lightbulbs.
E26 or E27 Socket with pigtail. UL listed. Works with all regular standard house hold bulbs. All E26 or E27 bulbs. Rated up to 500 watts, 250 VAC, 2 amps. This socket can be used with low voltage as long as you do not exceed the maximum power rating of 500 watts. . The wire is A.W.G. 20 gauge stranded wires. Perfect for installing wiring for lighting almost anywhere. The UL rating ensures quality and gives peace of mind. Save money and easier to replace this socket than to replace the whole fixture. Wires are approximately 5" in length. The socket is made of ceramic with copper plated metal contacts. Can be used for both line voltage or low voltage as long as you do not exceed 500 watts. Compatible with: Mfr.
Surface mount E26 or E27 Screw Base Socket. AC or DC use. PBT, Made from Anti-fire plastic. Perfect for adding light anywhere in your home, office, RV, Ect. Socket has two screw holes for mounting. Product measures 4.29" in width and 1.95" in height. The middle measures 2.17" wide. The light socket has two .1 Inch holes with screw clamps to clamp the wire in the wire hole.
E26-E27 ceramic socket with screw terminals. This porcelain socket is very rugged for long life. It has screw terminals so you can attach your wires directly to the socket. The ceramic socket has UL, CE and Rohs listing. Rated up to 250V, 660W. compatible with:
73HF
XD-018
E26-E27 Ceramic Socket with hidden screw terminals. This ceramic socket is designed for hanging type fixtures. CE and Rohs listed. Made of white Ceramic for long life.
Use this surface mount E26-E27 female socket to install led light bulbs on a surface. The socket is CE and Rohs listed. The socket is made out of PBT and plated metal materials.j Save time and money and use this fixture for a long life socket.
E26-E27 Socket, Surface mount with two mounting holes. CE and Rohs listed. White in color. Made of plastic and plated metals. Easy way to L.E.D. lighting in dark places by mounting this socket on a flat surface. Works with AC or DC.
Use this E27 Screw base that has solderable tabs for your specialized lighting applications. Rated Current: 5A Rated Voltage: 0V-380V. Approx.: 0.94" x 1.13".
Four way lamp holder. This E26-E27 female lamp holder is low profile. CE and Rohs listed. Using led lights work good in this fixture to provide light and save power.
E27 Solderable screw base. The ground or neutral wire is soldered to the inside of the threads. The line voltage wire is soldered to the tip on the bottom. There is no plug or pin at the bottom, since it is a solderable E26. The inside diameter is 25.35mm. The outside diameter at the tip is 26.14mm. The outside diameter on the open end is 27.02mm. The length is 26.80mm. The E27 base is made of copper plated nickel. The heat resistant temperature is 300°C. The rated voltage is up to 277 VAC. The rated power is up to 1100 Watts. The rated current is up to 4A. The weight is 7g. Great for hobbies, such as making your own lights! CE and Rohs.
E27 male converter to USA plug female receptacle. Use this to plug in a usa power plug to a E27 screw base light socket. UL, CE and Rohs listed. Easy way to get power where you have no power outlets. Takes all US plugs and screws into all standard home screw based sockets.
E26 E27 male screw to E26 E27 female screw base light bulb extender. Made of ceramic, UL, CE and Rohs listed. Helps par lights fit better and is easier to use this adapter/extender to help the light bulb fit the fixture.
E26 / E27 male to GX5.3 G4 female 6.35 female, MR11 female, MR16 female Adapter Converter. Use this adapter to convert G4, MR11 and MR16 products to E27 base. The mini bi-pin converter rated power is 2200 watts, 10 amps, and 220 volts max. This converter measures approximately 1.69 inches by 1.09 inches. This converter does not have a ballast or power supply, it just provides electrical connection from MR16 to E27. The adapter is made of ceramic to handle heat better in the center. The outside cosmetic ring is made of plastic materials. Medium base to mr11 socket.
Use this E26 / E27 male screw base to wires to adapter a light fixture to another device. CE, Rohs and RU listed, wires approximate length 8 inches. Up to 250 VAC.
E26 / E27 male to R7S 78mm female adapter. Made out of ceramic and copper materials. Rated voltage 250 VAC, Rated amperage 2. Rated Wattage 500 Watts. CE and ROHS listed.
E27 male to Gz 10 female adapter. UL, CE and Rohs listed. Made of flame retardant PBT and copper materials. Rated 250VAC@2amps total power 500 watts. Great to use instead of replacing that old fixture.
Use this converter that adapts E26 male to MR11, MR16, GX5.3, G6.35, GX6.35 female. The adapter is completely ceramic for high heat light bulbs such as mr16 halogen bulbs. Since it is completely ceramic or high temperature resistant materials, you do not have to worry about the socket melting. Since this converter is ceramic it will last for a long life. The E26 or E27 male will screw into all Americana standard Edison female light sockets. Rated power is 2200 watts, 10 amps, and 220 volts max. This converter measures approximately 1.69 inches by 1.09 inches. E26 and E27 are interchangeable. The converter is Rohs and CE listed.
Converts E26 E27 male Edison screw base to E12 female candelabra base. Great to use with our E12 LED Light products. There are no electronics to convert the voltage or amperage, just two metal conductors. Rated up to 250 watts. Rated up to 1 Amp. Rated up to 250 watts. CE and Rohs.
E26 E27 male to E17 female converter or adapter. This product works great when you have a E17 bulb and you need to use it in an E27 socket. The rated current is 10 amps. The rated voltage is 220 volts. The rated power is 2200 watts. CE approved. Can be used with incandescent bulbs as long as they are under the rated power of 2200 watts.
E26 E27 male screw to E26 E27 female screw base light bulb extender. Made of ceramic, UL, CE and Rohs listed. Helps par lights fit better and is easier to use this adapter/extender to help the light bulb fit the fixture.
Extends E26/E27 male 1 1/2 inches to e26/e27 female. For use such as a par30 long neck using a par30 short neck or for other bulbs that do not fit in the fixture. E27 male to E27 female converter, adapter. 120 VAC. Helps extend that light bulb and makes it easier to screw in led lamps and normal light bulbs into the socket in hard to reach area. The rated current is 10 amps. The rated voltage is 220 volts. The rated power is 2200 watts. E26 and E27 are the same thing, sometimes they are referred to as E26 sometimes they are referred to as E27. This converter has two metal conductors todo the E26 to E26 converter. There are no electronics inside this adapter. CE approved.
E26 / E27 male to GX5.3 G4 female 6.35 female, MR11 female, MR16 female Adapter Converter. Use this adapter to convert G4, MR11 and MR16 products to E27 base. The mini bi-pin converter rated power is 2200 watts, 10 amps, and 220 volts max. This converter measures approximately 1.69 inches by 1.09 inches. This converter does not have a ballast or power supply, it just provides electrical connection from MR16 to E27. The adapter is made of ceramic to handle heat better in the center. The outside cosmetic ring is made of plastic materials. Medium base to mr11 socket.
E26 / E27 male to GX5.3 G4 female 6.35 female, MR11 female, MR16 female Adapter Converter. Use this adapter to convert G4, MR11 and MR16 products to E27 base. The mini bi-pin converter rated power is 2200 watts, 10 amps, and 220 volts max. This converter measures approximately 1.69 inches by 1.09 inches. This converter does not have a ballast or power supply, it just provides electrical connection from MR16 to E27. The adapter is made of ceramic to handle heat better in the center. The outside cosmetic ring is made of plastic materials. Medium base to mr11 socket.
E26 / E27 male to GX5.3 G4 female 6.35 female, MR11 female, MR16 female Adapter Converter. Use this adapter to convert G4, MR11 and MR16 products to E27 base. The mini bi-pin converter rated power is 2200 watts, 10 amps, and 220 volts max. This converter measures approximately 1.69 inches by 1.09 inches. This converter does not have a ballast or power supply, it just provides electrical connection from MR16 to E27. The adapter is made of ceramic to handle heat better in the center. The outside cosmetic ring is made of plastic materials. Medium base to mr11 socket.
E27 male to Gz 10 female adapter. UL, CE and Rohs listed. Made of flame retardant PBT and copper materials. Rated 250VAC@2amps total power 500 watts. Great to use instead of replacing that old fixture.
E26 / E27 male to R7S 78mm female adapter. Made out of ceramic and copper materials. Rated voltage 250 VAC, Rated amperage 2. Rated Wattage 500 Watts. CE and ROHS listed.
E27 male converter to USA plug female receptacle. Use this to plug in a usa power plug to a E27 screw base light socket. UL, CE and Rohs listed. Easy way to get power where you have no power outlets. Takes all US plugs and screws into all standard home screw based sockets.
Use this E26 / E27 male screw base to wires to adapter a light fixture to another device. CE, Rohs and RU listed, wires approximate length 8 inches. Up to 250 VAC.
E27 male To R7S, J Type 189mm female Converter Adapter. CE and Rohs listed. Rated 2 amps, 500 watts, 250 VAC
E26 E27 male ceramic to E17 female converter. Rated up to 75 watts, 250 VAC. CE and Rohs listed. Use this ceramic converter to have a rugged and reliable converter. Save time and money by using this converter verus buying a new light bulb or light fixture.
E11 male to E26/E27 male converter. CE and Rohs listed. This is version A because the product is made on a machine versus hand made. Save time and money by using a replacement converter instead of replacing the fixture.
Use this E26-E27 male to GX70 female converter. CE and Rohs listed for long life. Lower cost to use this converter than to replace the fixture or light bulb. Save time and money by using this converter.
E27 male base. This E26-E27 male cap is solder less. Made of coppy for reliable connection. CE and Rohs listed. This product requires product 87089 to work.
E26 E27 male socket converter to wires. UL, Rohs and CE listed. Wires are about 8 inches long. Save time and money by using this converter instead of replacing the fixture or L.E.D. bulb
E27 Male to G12 Female Ceramic Converter. Great alternative to replacing an existing E27 fixture that you want to use G12 bulbs in. CE and Rohs listed. No special tools needed. See product detail for warranty period. Ceramic material allows for great heat dispersion, ensuring you get the maximum life out of your LED bulbs. This converter makes the g12 led retrofit easy. The terminals a spaced 12mm apart.
E26 or E27 Male to BA15S Female Socket Converter. Great for those that want to use a BA15S (1156) bulb in an existing E26 or E27 fixture. Ideal for those that are wanting a smaller profile, less energy demanding bulb (ex: product #34344, which is continuous use, would be a good replacement for a standard light bulb). CE and Rohs listed. See product detail for warranty period. Rated 2 amps @ 250VAC for a total of 500W per socket. Approximate length 3.13" and approximate diameter 1.3".
E39 socket. UL, CE and ROHS. The center tip is solder able so you are able to solder wires into place. Great for at home projects, easy to attach to any light to make your very own E39 mogul base bulb. Made of plated materials.
E39 Mogul Solder-free screw base. Great for hobbies, such as making your own lights! Made of metal plated materials, Easy to attach to the base of your light to make it a E39 Mogul base.
E39 male mogul to PGZ18 female ceramic converter. Use this CE and Rohs listed adapter to save time and money. It is much easier to use this adapter than to have to replace the whole fixture. Rated up to 6 kV T270. Rated up to 5A. Rated up to 250V. Compatible with Bersn. This is just a converter that has no electronics, just two conductors from E39/E40 to PGZ18.
E39 male To GU10 female Converter Adapter Lamp Holder. Rated up to 500 watts, 2 amps, 250 VAC. CE and Rohs listed. Made of flame retardant PBT and copper materials.
T1 3/4 Midget Flanged Cap. Single contact. Plated materials. The base outside diameter O.D. is 6.21mm. The base inside diameter I.D. is 5.77mm. The outside diameter O.D. around the flange is 7.2mm. The length of the base is 7.91mm. The base is solderable by installing a wire in the base and soldering the wire to the single contact on the base. See product detail for warranty period. This is the cap that attaches to the light bulb. CE Rohs.
T1 3/4 Midget Grooved Cap. Ideal for T1-3/4 bulbs that have a groove near the contact. Single contact cap. CE and Rohs listed. See product detail for warranty period. This is used to add a new base to a light bulb or led. O.D. is 5.67mm. The length is 8.16mm. The I.D. is 5.28mm.
T1 3/4 Midget Flanged Cap. Single contact. Plated materials. The base outside diameter O.D. is 6.21mm. The base inside diameter I.D. is 5.77mm. The outside diameter O.D. around the flange is 7.2mm. The length of the base is 7.91mm. The base is solderable by installing a wire in the base and soldering the wire to the single contact on the base. See product detail for warranty period. This is the cap that attaches to the light bulb. CE Rohs.
T1 3/4 Midget Grooved Cap. Ideal for T1-3/4 bulbs that have a groove near the contact. Single contact cap. CE and Rohs listed. See product detail for warranty period. This is used to add a new base to a light bulb or led. O.D. is 5.67mm. The length is 8.16mm. The I.D. is 5.28mm.
E5 midget screw socket with solderable tabs T1 3/4. Use for small miniature projects such as instrument, model rail road, model rc cars, planes. E5 is very small and easy to install in these miniature projects. CE and Rohs.
Festoon socket 31 mm. This socket accepts festoon size 1-1/4". The fixture has a single hole for a mounting screw. This product measures approximately 1.10 inches by 2.35 inches by 0.60 inches. This socket is fixed length for a 31 mm or 1.25" festoon. Great for incandescent or LED festoon LED Lighting applications. Works good to replace dome light socket or exterior lighting such as your license plate light socket.
The festoon socket accepts festoons light bulbs from 31 mm to 36 mm. The tabs are solder able so you can add wire. The plastic housing has a mounting screw hole in the middle. Great for adding additional led lighting such as dome, marker lighting and accent L.E.D. lighting for your car or home low voltage applications from zero to 48 Volts DC or AC. This Festoon Socket measures approximately 2.06 inches by 0.86 inches by 0.48 inches. Mounting screw hole diameter is 0.15 inches. Distance from edge to mounting hole is 0.70 inches. CE and Rohs listed. Great for 6 volt or 12 volt motorcycle applications. The black plastic part dimensions are 1.630 inches long by .5 inches in width.
The festoon socket accepts festoons light bulbs from 31 mm to 36 mm. The tabs are solder able so you can add wire. The plastic housing has a mounting screw hole in the middle. Great for adding additional led lighting such as dome, marker lighting and accent L.E.D. lighting for your car or home low voltage applications from zero to 48 Volts DC or AC. This Festoon Socket measures approximately 2.06 inches by 0.86 inches by 0.48 inches. Mounting screw hole diameter is 0.15 inches. Distance from edge to mounting hole is 0.70 inches. CE and Rohs listed. Great for 6 volt or 12 volt motorcycle applications. The black plastic part dimensions are 1.630 inches long by .5 inches in width.
BAC Adapter Wiring Harness. Use this adpater to connect BAC connectors together or to repair of defective BAC connection. Rated up to 600V.
Glass Fuse Holder 6x30 with Pigtail wires. Comes with 25 amp fuse. Excellent protection for over current.
Max Round Auto Fuse. Great for low voltage LED Lighting, inverters, amplifiers or solar applications. This product measures approximately 3.32 inches by 1.60 inches. 0.175" approximate mounting hole diameter. Approximate 1.25" hole to hole spacing. Approximately holds fuses approximately 0.4" diameter. Approximately holds a fuse 1.5" long. Approximately holds wire approximate diameter from 0.2" to 0.4". Has weather proofing gasket rings to help keep the fuse and wires dry. Has a set screw to tightened the wires or wire crimps. Has a key to keep the fuse from spinning.
G12 Ceramic Socket 250V 4A Max with Wires. Max temperature 180 C. Wires approximately 6 inches long. Socket rated at 250V @ 4amps. The socket is rated up to 1000 watts. Made with ceramic so it is resistant to higher temperature. This adapter works great to for G12 retro or new installations. The terminals are spaced 12mm apart. CE and Rohs.
G12 Male to E26 or E27 female socket converter. CE and Rohs listed. Great when you want to use standard Edison screw base bulbs, but do not want to remove/replace existing fixture. Made from PBT material with a copper contacts. Rated 2 amps @ 277 VAC 554 Watts. This converter can operate from 100 VAC up to 277 VAC. This converter is two pieces of metal that is encased is plastic materials. The two pieces of metal make electrical contact from the two contacts of G12 to the threads and inner contact of the E26. This converter has no electronics so if you bulb cannot handle a ballast you must remove the ballast since you are replacing the G12 ballasted bulb with a standard E27 non ballasted bulb that does not operate at the reduced voltage that a E26 bulb operates at. The length from where the pins start to the top is 2.153 inches. The diameter is 1.254 inches.
R17D Philips 600V 660W Lamp Holder Adapter. Use this to adapt Philips 600V 660 Watt lamps to the fixture.
G23 2 Pin male with 2 Pin or G23 4 Pin adapts to E26 or E27 female Standard Edison Screw Base. Very easy to install adapter versus changing out the entire fixture. This converter saves time & money CE, Rohs certifications marks. The PLS 2 pin converter will fit G23 and G23-2 sockets/bases. The starter and/or ballast will need to be bypassed/removed if using a LED Light in the fixture. The G23 2 Pin is led common base which fits box G23 2 Pin and G23-2 2 or 4 Pin sockets. The PLS 2 pin has the wattage options 5, 7, 9, 11w = G23. Rated 500 Watts, 250 VAC, 2 Amps. Works good for self ballasted germicidal lamps. This converter has no electronics just wires that connect the E26/E27 to the G23 so what voltage you screw this converter into is the same voltage that will be provide for the G23 bulb inserted into the converter.
Compatible with:
Aero garden grow bulb
Model #100629
G24 2 pin base male to E27 medium base female converter or adapter. This product works when you have a E26/E27 bulb and you need to use it in an G24 socket. The rated current is 2 amps. The rated voltage is 250 volts. The rated power is 500 watts. CE approved. This convertor measures approximately 2.54 inches by 1.47 inches. Fits g24d-1, g24d-2, g24d-3 sockets. Our base has no notches (LED Common base), so it is universal for all 2 pin G24 base products. The starter and/or ballast will need to be bypassed if using a LED light, incandescent or a Ballasted CFL in the fixture. The converter is called led common base, since it fits all of g24 2 pin fixtures. Please Note: You will need to BYPASS the BALLAST in your SYSTEM for this converter to work properly. The PLC 2 pin has 4 wattage options 10 and 13w = G24d-1, 18w = G24d-2, 26w = G24d-3
G24 2 pin base male to E27 medium base female converter or adapter. This product works when you have a E26/E27 bulb and you need to use it in an G24 socket. The rated current is 2 amps. The rated voltage is 250 volts. The rated power is 500 watts. CE approved. This convertor measures approximately 2.54 inches by 1.47 inches. Fits g24d-1, g24d-2, g24d-3 sockets. Our base has no notches (LED Common base), so it is universal for all 2 pin G24 base products. The starter and/or ballast will need to be bypassed if using a LED light, incandescent or a Ballasted CFL in the fixture. The converter is called led common base, since it fits all of g24 2 pin fixtures. Please Note: You will need to BYPASS the BALLAST in your SYSTEM for this converter to work properly. The PLC 2 pin has 4 wattage options 10 and 13w = G24d-1, 18w = G24d-2, 26w = G24d-3
G24 4 Pin Surface Mount Socket. This G24 socket will accept 2 pin and 4 pin G24. Surface mount design easy to install. CE and Rohs.
G24 2 pin base male to E27 medium base female converter or adapter. This product works when you have a E26/E27 bulb and you need to use it in an G24 socket. The rated current is 2 amps. The rated voltage is 250 volts. The rated power is 500 watts. CE approved. This convertor measures approximately 2.54 inches by 1.47 inches. Fits g24d-1, g24d-2, g24d-3 sockets. Our base has no notches (LED Common base), so it is universal for all 2 pin G24 base products. The starter and/or ballast will need to be bypassed if using a LED light, incandescent or a Ballasted CFL in the fixture. The converter is called led common base, since it fits all of g24 2 pin fixtures. Please Note: You will need to BYPASS the BALLAST in your SYSTEM for this converter to work properly. The PLC 2 pin has 4 wattage options 10 and 13w = G24d-1, 18w = G24d-2, 26w = G24d-3
G24 4-pin male to E26 female converter. Use this adapter to convert to a E26 screw base and not have to change out fixture or replace the bulb to new base. Approx. size 2.54” x 1.50”. Please measure middle post BEFORE buying this converter. Rated up to 2 Amps and 277V or 544 watts. The middle post length of .82 (21 mm) base requires a shorter length base, please use GX24 4 Pin part number 15485. The starter and/or ballast will need to be bypassed. Common Questions: Can I use a G24 base plug into the existing Gx24 fitting ? The answer is NO they are not interchangeable converter sockets. The LED common base fits all sockets regardless of the notches/keying tabs. This converter works with Edison Medium base E26 based male bulbs rated up to 500 watts. Please Note: You will need to BYPASS the BALLAST in your SYSTEM for this converter to work properly.
G24 4 Pin Surface Mount Socket. This G24 socket will accept 2 pin and 4 pin G24. Surface mount design easy to install. CE and Rohs.
G24 4-pin male to E26 female converter. Use this adapter to convert to a E26 screw base and not have to change out fixture or replace the bulb to new base. Approx. size 2.54” x 1.50”. Please measure middle post BEFORE buying this converter. Rated up to 2 Amps and 277V or 544 watts. The middle post length of .82 (21 mm) base requires a shorter length base, please use GX24 4 Pin part number 15485. The starter and/or ballast will need to be bypassed. Common Questions: Can I use a G24 base plug into the existing Gx24 fitting ? The answer is NO they are not interchangeable converter sockets. The LED common base fits all sockets regardless of the notches/keying tabs. This converter works with Edison Medium base E26 based male bulbs rated up to 500 watts. Please Note: You will need to BYPASS the BALLAST in your SYSTEM for this converter to work properly.
G4 GX4 GZ4 Ceramic bipin female socket. 9 inches of wires, ceramic shell, female socket. This socket is very small to help with mounting the socket for led lights or other lighting. Wires are approximately 12 inches. This ceramic female socket fits a standard G4 led bulb or incandescent bulb. The wire diameter is awg 24. Max Voltage up to 30 Volts. Max Current up to 1A. Max Wattage up to 30 Watt. Net weight 0.2 Oz.
Compatible with:
G4
GU4
GZ4
bi pin
bi-pin
Surface mount bi-pin socket. For G4, GU5.3, Gx5.3, GY6.35 and GZ4 bulbs. Made of ceramic/porcelain for reliable life that is resistant to heat. Use this bipin for G4, MR11 and MR16 bulbs. The wires are 6 inches 20 AWG stranded copper with silicon insulation. Rated up to 100 Watts, 25 VAC 12.5 amps. There are mounting holes to mount this to a flat surface. This bi pin base socket fits G4, MR11 and MR16 bulbs. UL, SA certified. Works great for surface mount g4, mr11, mr16 lamp holder applications.
G4 GU4 GZ4 GU5.3 G6.35 Bipin Female Ceramic Socket with pigtail Wires. Use this mini bi-pin for G4, MR11 and MR16. The wires are 6 inches 18 AWG stranded copper with heat resistant silicon insulation. The body is ceramic and metal. Rated 100W up to 277VAC. Rated up to 0.36 Amps. Fits G/GU4/GZ4 GU5.3/GX5.3 G/GZ/GY6.35 Socket Lamp Holder wire wires Up to 100 Watts. UL, CE and Rohs. Has silicon insulation. This product can be used for 12 Volt landscape lights that the bulbs are less than 100 Watts.
G4 GX4 GZ4 Ceramic bipin female socket. 9 inches of wires, ceramic shell, female socket. This socket is very small to help with mounting the socket for led lights or other lighting. Wires are approximately 12 inches. This ceramic female socket fits a standard G4 led bulb or incandescent bulb. The wire diameter is awg 24. Max Voltage up to 30 Volts. Max Current up to 1A. Max Wattage up to 30 Watt. Net weight 0.2 Oz.
Compatible with:
G4
GU4
GZ4
bi pin
bi-pin
G4 GX4 GZ4 Ceramic bipin female socket. 9 inches of wires, ceramic shell, female socket. This socket is very small to help with mounting the socket for led lights or other lighting. Wires are approximately 12 inches. This ceramic female socket fits a standard G4 led bulb or incandescent bulb. The wire diameter is awg 24. Max Voltage up to 30 Volts. Max Current up to 1A. Max Wattage up to 30 Watt. Net weight 0.2 Oz.
Compatible with:
G4
GU4
GZ4
bi pin
bi-pin
G53 female ceramic socket with pigtail wires. CE and Rohs listed for long life. The ceramic is white color. The wire is 18 AWG and about 3.5 inches long. Made of ceramic for a realable connection. Save time and money by replacing this socket verus replacing the whole fixture.
Surface mount bi-pin socket. For G4, GU5.3, Gx5.3, GY6.35 and GZ4 bulbs. Made of ceramic/porcelain for reliable life that is resistant to heat. Use this bipin for G4, MR11 and MR16 bulbs. The wires are 6 inches 20 AWG stranded copper with silicon insulation. Rated up to 100 Watts, 25 VAC 12.5 amps. There are mounting holes to mount this to a flat surface. This bi pin base socket fits G4, MR11 and MR16 bulbs. UL, SA certified. Works great for surface mount g4, mr11, mr16 lamp holder applications.
G4 GU4 GZ4 GU5.3 G6.35 Bipin Female Ceramic Socket with pigtail Wires. Use this mini bi-pin for G4, MR11 and MR16. The wires are 6 inches 18 AWG stranded copper with heat resistant silicon insulation. The body is ceramic and metal. Rated 100W up to 277VAC. Rated up to 0.36 Amps. Fits G/GU4/GZ4 GU5.3/GX5.3 G/GZ/GY6.35 Socket Lamp Holder wire wires Up to 100 Watts. UL, CE and Rohs. Has silicon insulation. This product can be used for 12 Volt landscape lights that the bulbs are less than 100 Watts.
G53 female ceramic socket with pigtail wires. CE and Rohs listed for long life. The ceramic is white color. The wire is 18 AWG and about 3.5 inches long. Made of ceramic for a realable connection. Save time and money by replacing this socket verus replacing the whole fixture.
Surface mount bi-pin socket. For G4, GU5.3, Gx5.3, GY6.35 and GZ4 bulbs. Made of ceramic/porcelain for reliable life that is resistant to heat. Use this bipin for G4, MR11 and MR16 bulbs. The wires are 6 inches 20 AWG stranded copper with silicon insulation. Rated up to 100 Watts, 25 VAC 12.5 amps. There are mounting holes to mount this to a flat surface. This bi pin base socket fits G4, MR11 and MR16 bulbs. UL, SA certified. Works great for surface mount g4, mr11, mr16 lamp holder applications.
G4 GU4 GZ4 GU5.3 G6.35 Bipin Female Ceramic Socket with pigtail Wires. Use this mini bi-pin for G4, MR11 and MR16. The wires are 6 inches 18 AWG stranded copper with heat resistant silicon insulation. The body is ceramic and metal. Rated 100W up to 277VAC. Rated up to 0.36 Amps. Fits G/GU4/GZ4 GU5.3/GX5.3 G/GZ/GY6.35 Socket Lamp Holder wire wires Up to 100 Watts. UL, CE and Rohs. Has silicon insulation. This product can be used for 12 Volt landscape lights that the bulbs are less than 100 Watts.
G8.5 Ceramic Socket with Wires. With 18 AWG wire about 6 inches long with heat resistant insulation. Rated up to 750 V @ 2 Amps. T250. Rated up to 5KV. Approximate size of socket is 1.2" long, 0.8375" diameter. Approximate hole to hole spacing 0.550". Approximate mounting hole diameter 0.125". Approximate pin to pin spacing for G8.5 is 8.5mm. CE and Rohs.
G9 Ceramic Socket with Wires 250V 2A. The ceramic socket has about 6 inches of wire. Use this G9 Socket to G9 LED bulbs. Since it is ceramic it is more resistance to bulbs that get hot. CE and Rohs certified. The socket is rated for 500 Watts. If you need to operate the voltage higher then you have to reduce the current not to exceed total 500 Watts.
G9 to E26 converter is easy to use. The G9 male fits your G9 fixture. The E26 female is for your led bulb. This can converts your G9 fixture to LED Lights or incandescent Edison screw base light bulbs. Save money and time by using this adapter versus changing the whole fixture. Max voltage 250 VAC. Max Watts 500 Watts. This product measures approximately 2.224 inches by 1.33 inches. CE and Rohs.
G9 male converter base to E14 female base adapter. CE and Rohs listed. No electronics are in the converter, the contacts are transferred from G9 base to E14 base. Save time and money by using this converter instead of replacing the fixture or the l.e.d. light bulb. This converter has a low profile to fit spaces that have limited access.
Use this to convert from G9 to GU10. CE and Rohs listed, save money and time replacing just the converter verus replacing the whole fixture if you can even find a replacement fixture.
G9 male to MR16 female converter. Use this adapter to convert from G9 to MR16. CE and Rohs listed. Save time and money using the adapter versus replacing the whole fixture.
G9 male to E14 female Adapter Converter. Body is made of flame retardant PBT and contact material copper. Use this adapter to convert your G9 base to an E14 screw base and not have to change out fixture or replace light bulb to new base. Approx.: 2.26” x 1.12”. Rated up to 6 Amps and 250 Volt AC or 1000 watts. CE, Rohs certified.
G9.5 Socket with wires that are 7" long. Made for HPL bulbs. Up to 1000 Watts. Up to 500 Volts. Up to 20 Amps. The wires have heat resistant covering. 0.468" thick. 0.879" tall. 0.759" wide. Pin to pin spacing 9.5 mm. 3.77 mm hole diameter. The socket is made of ceramic. CE and Rohs.
GU10 Socket with pigtail wires. The GU10 socket is made of ceramic material, with copper/plated metal contacts. CE and Rohs listed. The wires are 18 awg stranded copper wire. The wires are about 8 inches long. The rated voltage is 220 VAC. The rated amperage is 2 Amps. The rated Wattage is 500 Watts.
GU10 male to E27 female converter adapter. Great to adapt the GU10 base to E27 so you can use more choices for LED Lights. The rated current is 10 amps. The rated voltage is 220 volts. The rated power is 2200 watts. CE approved. The maximum over length M.O.L. is 2.24". The maximum overall diameter is M.O.D. 1.29". There are no electronics inside the converter just two metal pieces that transfer the voltage from the GU10 base to E27 base.
Use this GU24 2 pin male to E26-E27 female adapter. This ceramic adapter has a screw and large PBC nut that can be used to to install into a hole. UL, CE and Rohs listed. This adapter is ceramic. Use this fitting instead of replacing the fixture. Rated up to 250 VAC and 660 Watts. E26 Edison screw base and E27 Edison screw base are interchangeable.
GU24 to E26 medium base female Converter. E26 is a standard size Edison base socket. Use this converter to adapt GU24 base male 2 pin socket with E27 Base led or halogen bulb. The rated current is 2 amps. The rated voltage is 250 volts. The rated power is 500 watts. So much easier to install this adapter versus installing a new fixture. CE & Rohs approved. This product measures 1.49 inches by 1.85 inches.
GU24 2 pin male to E26 E27 female adapter. Made of ceramic. CE and Rohs listed. Use this adapter to fit a standard e27 base light bulb into a Gu24 socket. Saves time and money using this adapter versus replacing the fixture. The converter can handle voltages up to 250V.The converter can handle up to 2200 Watts.
Use this GU24 2 pin male to E26-E27 female adapter. This ceramic adapter has a screw and large PBC nut that can be used to to install into a hole. UL, CE and Rohs listed. This adapter is ceramic. Use this fitting instead of replacing the fixture. Rated up to 250 VAC and 660 Watts. E26 Edison screw base and E27 Edison screw base are interchangeable.
GU24 to E26 medium base female Converter. E26 is a standard size Edison base socket. Use this converter to adapt GU24 base male 2 pin socket with E27 Base led or halogen bulb. The rated current is 2 amps. The rated voltage is 250 volts. The rated power is 500 watts. So much easier to install this adapter versus installing a new fixture. CE & Rohs approved. This product measures 1.49 inches by 1.85 inches.
GU24 2 pin male to E26 E27 female adapter. Made of ceramic. CE and Rohs listed. Use this adapter to fit a standard e27 base light bulb into a Gu24 socket. Saves time and money using this adapter versus replacing the fixture. The converter can handle voltages up to 250V.The converter can handle up to 2200 Watts.
GU6.5 female lamp holder with wires. Rated 500 watts, 2 amps, 250VAC. CE and Rohs listed. Made of flame retardant materials and metal materials. Great to use lamp holder instead of replacing the fixture. 8 inches or 20 cm of wire.
GU6.5 female lamp holder with wires. Rated 500 watts, 2 amps, 250VAC. CE and Rohs listed. Made of flame retardant materials and metal materials. Great to use lamp holder instead of replacing the fixture. 8 inches or 20 cm of wire.
GX16D female Socket Ceramic with Wires. CE, Rohs listed. Made of ceramic for long life and heat resistance. Used for Par 56 light bulbs. The wires are about 8 inches long. The wire is made of up to 14 AWG. The insulation is silicon rubber and the wire is tinned conductor. The wire is the same type of wire used for appliances, so it can withstand heat. Rated at 600V. The insulation diameter is 30 mils. The rated wattage is 1500 Watts. 5KV pulse rated.
GX23D 2 Pin to E27 converter. Rated 500 watts, 250 VAC, 2 Amps. The GX23D is male. The E27 is female. CE and Rohs. Made of Flame retardant PBT + Copper. Great to replace cfl with energy efficient LED bulb. This adapter is l.e.d. common base so it fits GX23D, GX23D-2. The starter and/or ballast will need to be bypassed if using a LED light, incandescent or a Ballasted CFL in the fixture. The GX23D 2 pin has two notches on the middle post. Please Note: You will need to BYPASS the BALLAST in your SYSTEM for this converter to work properly. Includes one per package. CE and Rohs.
Gx23 2 Pin Surface Mount Socket. Easy to install your PL Gx23 2 Pin bulbs. Made of plastic materials. CE and Rohs.
E26 or E27 medium base Edison female socket F519. This socket has a mounting bracket so you can properly mount the socket to the fixture or wall. The socket is made of porcelain. The VDE mark is a certification that indicates a product meets safety and quality standards for electrical, medical, and information technologies. The socket has a VDE mark. The socket also has a S Mark. The socket has D Mark. The D Mark is owned by UL. The socket is also VEM marked. The bracket is 0.3135". The hole diameter is 0.1355". The hole to hole spacing is approximately 0.4725". The maximum diameter of the socket is 1.54" and the length of the socket is 1.776".
GX24 2 Pin to E26 converter. The GX24 is a male socket. The E26 is a female socket. Made of PBT, copper and plastic materials. CE, ROHS. The starter and/or ballast will need to be bypassed if using a LED Light or a light bulb in the fixture. LED common converter fits GX24d-1, GX24d-2, GX24d-3. Rated 500 watts, 2 amps, 250 VAC. The PLT 2 pin has 3 wattage options 13w = GX24d-1, 18w = GX24d-2 and 26w = GX24d-3
Gx24 to e26 converter is common base so it fits all GX24Q sockets. Save time and money by using this adapter instead of replacing the fixture. Very low profile. The main square part is 15 mm long. Compatible with GX24Q-1, GX24Q-2, Gx24Q-3, GX24Q-4. Can I use a GX24 base plug into the existing G24 fitting? The answer is no. Made of flame retardant PBT and copper materials. This converter works with Edison Medium base E26 based male bulbs rated up to 544 watts. The converter can handle up to 2 amps @ 277 VAC. You will need to BYPASS or remove the BALLAST. Please measure middle post BEFORE buying this converter it should be 15 mm or .59 inches or approximately 9/16 inch. Please contact a certified electrician to disable or bypass or remove the ballast. Includes one product per package. CE and Rohs. Compatible with the following:
f42tbx/835
Gx24 to e26 converter is common base so it fits all GX24Q sockets. Save time and money by using this adapter instead of replacing the fixture. Very low profile. The main square part is 15 mm long. Compatible with GX24Q-1, GX24Q-2, Gx24Q-3, GX24Q-4. Can I use a GX24 base plug into the existing G24 fitting? The answer is no. Made of flame retardant PBT and copper materials. This converter works with Edison Medium base E26 based male bulbs rated up to 544 watts. The converter can handle up to 2 amps @ 277 VAC. You will need to BYPASS or remove the BALLAST. Please measure middle post BEFORE buying this converter it should be 15 mm or .59 inches or approximately 9/16 inch. Please contact a certified electrician to disable or bypass or remove the ballast. Includes one product per package. CE and Rohs. Compatible with the following:
f42tbx/835
GZ10 Ceramic Socket. This socket works great for old fixtures that have corroded or rusted terminals and need to be replaced. Rated up to 2 Amps. Rated up to 250 VAC. Wires made with heat resistant silicone insulation. The wire is 20 AWG. The wire length is approximately 5.5". The mounting hole space is approximately 0.725" apart. The mounting hole diameter is 0.140" CE and VDE listed.
H1 Adapter/Converter socket. Use this socket to make your own H1 LED Driving light or standard H1 light. Approximate size is .93in x .31in x .46in. Also 5 inches of wire. The wires are 18 awg. Use this harness for relays, flashers, headlights, fog lights, driving lights.
H4 base. Operate 9-85 Volts. Output power 18 Watts for high beam. Up to 15 Watts for low beam. Uses only 1.5 Amps. Luminous output in Lumens 1500lm. Long warranty please see details on page. Long life up to 30,000 hours. The beam is 120 degrees. This headlamp has two filaments. Since the headlight is led it is solid state so you do not have to worry about broken glass or filament. Available in White 6500 Kelvin. Works in vintage and classic 12V positive or negative ground for cars, trucks, motorcycles, ATV's and tractors. This lamp is comparable to a 180 watt incandescence bulb. One headlight is sold per package. This head light is comparable to a projector beam motorcycle and scooter headlight. Easy DIY to remove the old headlight and install led headlamp. Very long life and very bright. Made with red copper aluminum alloy.
Compatible with the following:
H4 H8 H11 9005 9006
Fits HID Xenon L1
H4 HB2 9003 Adapter, use this adapter/harness to wire up your own LED Light driving/fog lights, or to replace an existing adapter. Approximate size is 1in x 1.18in x .75in. Also has 5 inches of wire. This harness connector works great for relays or flashers such as part number 79866 or H4 p43t or p45t. This harness can operate 6 Volt, 12 Volt, 24 Volt low voltage applications. The ground which is the black wire. The white wire which is the low beam. The blue wire which is the high beam. CE and Rohs.
H7 Socket with Pigtail wires. Use this socket with Pigtail wires to replace or add new LED Driving lights or Fog lights to your ride. Very easy to install or replace. Approximate size is .94in x .70in x .46in. It also has 5 inches of wire. The wire is 16 AWG. CE and Rohs.
Connector for marine use. Both the connector and the plug can be connecter using quick disconnect terminals. At 12 volts the max current is 20 Amps, at 24 volts the max current is 10 Amps. The maximum wattage is 240 Watts. The material is Nylon PA66. The plug and socket have male .250" quick disconnect terminals for push on .250" female terminals. 2 wire, up to 36 volts, nylon housing, brass contacts, vinyl molded cover for receptacle. 2 wire, up to 36 volts, nylon housing, brass contacts for the plug. CE and Rohs.
T8 tombstone, use this socket for existing or new t8 tube installation. The T8 socket is shunted meaning both terminals are shorted together. Shunted are shorted between both sides of the end cap. Shunted for use with workhorse ballasts since the ends of the lamp are shorted. Non shunted is for use with advanced/universal because you have one wire to each terminal of the lamp, they are not jumped together. CE and Rohs certified. Comes as a pair (2).
Compatible with:
medium bipin
medium bi pin
medium bi-pin
Oval T8 to T5 converter. Use this oval converter to convert a T5 tube to fit a T8 fixture. Rohs and CE listed. Save time and money by using this converter versus changing out the T8 fixture. Great for L.E.D. tube light projects. Converts T12 to T5.
T8 to T5 oval shape medium bi-pin with 19mm hole spacing. CE and Rohs listed. Use this oval converter to convert a T5 tube to fit inside a T8 fixture so you do not have to replace the fixture. These converters work great for LED tube lighting. Converts bipin T12 to mini bipin T5.
Use this T8 Tombstone C13 female with Metal clip to retrofit existing T8 fixtures to replace rusted or corroded or broken T8 holder. CE and Rohs listed. Shunted meaning 1 wire comes out of each socket, that the two connectors are shunted as one for each side.
T8 tombstone with C13 female socket. This tombstone has a metal clip. The socket is CE and Rohs listed. Use this to replace broken T8 tombstone or update the t8 fixture to accept C13 t8 led tube. Non shunted two wires come out of the socket and the two connections are separate non shunted configuration for some LED tube lights.
T8 female socket, for T8 fixtures. The socket is made of PBC plastic. CE and Rohs listed. Perfect for replacing those worn out T8 tombstones without needing to replace the entire fixture. Shunted are "jumpered" between both sides of the end cap. Non shunted is for use with advanced/universal because you have one wire to each terminal of the lamp, they are not jumped together. Each terminal is push to fit to insert the wire into the correct position.
This product is sold as a Pair (2 pcs).
Miniature bipin T5 socket for tube lights. Call tombstone, has rotatable socket, made of Bakelite. CE and Rohs listed. Female socket, fits standard T5 Miniature Bi Pin male tubes. Sold in Pairs.
Compatible with:
bipin
bi-pin
bi pin
T5 Miniature bipin female socket. This Tombstone is a Shunted tube light holder. CE and Rohs listed. Use this socket to replace broken, rusted, water damaged sockets. It is shunted meaning the two contacts are shorted together. Used for T5 tube lights. This bi-pin socket is made of plastic.
Solder Less bottom cap for E26 Solder Less copper cap (Product number 87698). No special tools needed, and no need to deal with a soldering iron. Saves you time and hassle by simply plugging the bottom with this cap instead of needing to solder it in place. You must order 87698 for product to work. CE and Rohs.
Use this I.D.C. insulation displacement connector to easy connect crimp two 18 awg wires using just a pair of plyers. CE and Rohs listed. Save time and use a reliable IDC connection to last for years
P15D-25-3 Base male Cap. Use this old style cap to upgrade your corroded or rusty light bulb base. Easy to solder. The base is 15 mm diameter. The disc is 25mm diameter. There are two contacts on the bottom the you can solder too. There are 3 tabs on the side of the 25mm disc.
P15d-30 cap. The base is 15 mm diameter. The ring is 30 mm diameter. There are 2 contacts. Plated metal and the bottom has epoxy very rugged. For old vintage and classic cars, tractors and motorcycles. The base and contacts are solder-able for long life. The reason this product is a NCNRNW non cancellable, non returnable because the socket is old and corroded and causes the disc to break. CE and Rohs.
G4 GX4 GZ4 Ceramic bipin female socket. 9 inches of wires, ceramic shell, female socket. This socket is very small to help with mounting the socket for led lights or other lighting. Wires are approximately 12 inches. This ceramic female socket fits a standard G4 led bulb or incandescent bulb. The wire diameter is awg 24. Max Voltage up to 30 Volts. Max Current up to 1A. Max Wattage up to 30 Watt. Net weight 0.2 Oz.
Compatible with:
G4
GU4
GZ4
bi pin
bi-pin
Surface mount socket 1142 BA15D with wires. Use this socket to replace corroded, rusted or broken socket with a new socket. The wires are about 6 inches long. The socket has two contacts. The body is 15mm diameter. This socket is for bulbs with the bayonets are equal height. This socket works great for #1158 and #1142. CE and Rohs listed.
Compatible with:
1142
#1142
1158
#1158
BA15S for 1129 or 1156 Socket with pigtail wire. The socket is made of durable metal materials. The wire is 18 awg stranded wire. The diameter is 15mm with even bayonets and a single contact. Can be used for positive ground or negative ground. For voltages from 0 to 24 volts. CE and Rohs listed.
R17D Philips 600V 660W Lamp Holder Adapter. Use this to adapt Philips 600V 660 Watt lamps to the fixture.
E27 male To R7S, J Type 189mm female Converter Adapter. CE and Rohs listed. Rated 2 amps, 500 watts, 250 VAC
R7S dim-able 15 Watt J Type T3. Very slim designed only 25 mm diameter. The length is 189 mm. The l.e.d. bulb has R7S end caps on each end for each installation. This LED light bulb is comparable to a 140 Watt incadescence light bulb. The led bulb has a long life up to 50,000 hours or longer. Bulb is CE and Rohs listed. The lens is transparent or clear for the most light output. The bulb is made with 144 pieces of 2835 SMD. Each SMD chip outputs around 24 to 26 Lumens. The LED light outputs 1500 Lumens. The led is cool to the touch compared to the incandescent. quartz bulb you are replacing. The CRI>80. The available colors are White 6000 Kelvin and Warm white 3000 Kelvin. This LED light bulb is dim-able using a 120 VAC dimming light switch. Made with poly carbonate and metal materials for a rugged construction.
118mm female socket with wires. Use this socket to fix a broken fixture, or upgrading a fixture to a R7S 118mm long led light bulb. CE and Rohs. Long life made of ceramic and metal for hi heat applications. Rated up to 250VAC. Up to 1,000 Watt. Rated up 2 to 4 Amp.
E27 male To R7S, J Type 189mm female Converter Adapter. CE and Rohs listed. Rated 2 amps, 500 watts, 250 VAC
R7S 189mm female socket with pigtail wires. CE and Rohs listed. Made of ceramic and metal plated materials. Long life and able to deal with hot light bulbs such as the R7S. Save money and time by replacing the socket versus the whole fixture. Rated up to 250VAC. Rated up to 1,000 Watt. Rated up to 2 to 4 Amps.
R7S 254mm female socket with wires. Made of ceramic and metal plated materials for long life. CE and Rohs listed. The wires are about 15cm long, .75mm diameter. Save money and time by replacing the socket versus replacing the whole fixture. Rated up to 250 VAC. Rated up to 1,000 Watt. Up to 2 to 4 Amps.
T8 tombstone recessed double contact R17D Shunted socket. CE and Rohs listed. Great socket to retrofit existing fixtures. Use to update the T8 fixture to use R17D tubes versus C13 or single pin tubes. Each socket is shunted meaning 1 wire for both terminals on each T8 socket. Sold 1 matched per package (1 stationary, 1 plunger). cUL, 600W 600V
T8 Tombstone R17D female retrofit socket non shunted. UL, CE and Rohs listed. The socket is non shunted which means you have two wires to hook up in each socket. This socket works great to upgrade a T8 fixture to R17D from a C13 or single pin socket tube. This product pricing is 1 R17D tombstone matched pair (1 plunger, 1 stationary). cUL, 600W, 600V. This is a R17D socket adapter for installing R17D tubes into a fixture with R17D tombstones. There are 4 holes in the bottom of the socket which are QuickWire or Push-in connectors. 2 Holes on the right side and 2 holes on the left side. Each side 2 holes are connected to each other. These 2 holes on each side connect to 1 contact of the G13 socket. The other side of the G13 socket goes to the other two holes that align with the G13 contact. So two holes on the left connect to the left side G13 contact.
S14D Female socket, surface mount. CE and Rohs listed. Great for cabinets, display case. There is no electronics the socket contacts. Save time and money by using this surface mount socket and the S14D base lamps. This product comes one per package.
S14D Female socket, surface mount. CE and Rohs listed. Great for cabinets, display case. There is no electronics the socket contacts. Save time and money by using this surface mount socket and the S14D base lamps. This product comes one per package.
S14S Female Surface mount wall socket. CE and Rohs listed. Use this S14S socket to mate with S14S light bulbs. Great for cabinets and display cases. Save time and money using this socket versus replacing or adding new fixture. Designed to operate from 35W up to 120W. A pair is provided for each bulb.
S14S Female Surface mount wall socket. CE and Rohs listed. Use this S14S socket to mate with S14S light bulbs. Great for cabinets and display cases. Save time and money using this socket versus replacing or adding new fixture. Designed to operate from 35W up to 120W. A pair is provided for each bulb.
Single Pin T8 Tombstone Single Pin female Retrofit fixture. Use this to replace broken or changing a C13 or R17D to single pin tube light. CE and Rohs listed. This comes 1 plunger and 1 socket per matched pair. Up to 250 VAC. CE and Rohs listed. For T8, T10 and T12 FA8 tube lamps. Easy to install by sliding or snapping in. Great for fluorescent and LED tube lamps. Works for both 50/60 hz installations. Made with plastic and metal materials.
T10 wedge socket. Made of rubber. The socket has 6 inches of wire. Great for dashboards, dome lights, door lights and exterior lights. After time the contacts get corroded and need to be replaced. The pigtail wire makes it easy to hook up to the existing wiring. Fits T3 1/4 bulbs. Works with both incandescent or led bulbs. Wires are about 8 inches long and 18 AWG. Works great for custom and classic vehicles and motorcycles. Replace corroded t10 sockets with a new socket if you cannot figure out what is wrong with your current socket. These sockets need to be in perfect condition for truck stop and police. This is a open wedge socket.
T10 Wedge Socket Works with any T10 or 194 miniature wedge base bulbs. This socket has approx. The wires are colored are black and red for easy installation. The wire length is approximately 4.92" long. Great for small and compact lighting projects. Works great to add turn signal in side the headlight for custom classic cars and vintage trucks. Works with both incandescent or led bulb. Wire gauge 20 AWG. The socket fixture is made from nylon. Works great to replace corroded or broken t10 female sockets. These sockets work with 6v, 12v, 24v up to 120v. Rated up to 1.5A@24V. The socket is rated up to 36 Watts. Works for both positive ground or negative ground. Made with oxygen free pure copper OFC. CE and Rohs.
T10 wedge socket twist lock is used to install a t10 lamp or 194 bulb into this twist lock socket. Then install the bulb & twist lock socket into the dashboard or other interior electronics. This is a twist lock wedge base socket. Compatible with: L00PC194
T10 Wedge Socket, Plastic, Black, 6 Inches Wire. Use this socket to replace broken socket, or bad contacts. Wires ware about 6 inches long and 18-20 AWG. Works great to replace old or corroded sockets in old cars, trucks and tractors.
T15 Wedge with pigtail wires. Injected molded black plastic socket. The wires about 6 inches long, 18 awg stranded copper wire. CE and Rohs listed. There is a .1 hole in the in this socket housing area to mount this socket. This is a socket that can operate low voltage ac or dc for outdoor lighting bulb holders such as t5 tubular shape bulbs for landscape lighting. You can use either LED or incandescent bulbs. You can use either T10 wedge bulbs or T15 wedge bulbs. Compatible with: Malibu landscape lighting bulbs
T19 socket, metal plated materials, with a rubber boot and 6 inches of wire. T19 are used mainly for motorcycle headlight sockets. Compatible with:
p15d-25-1
PX15d
H6
h6m
P15D
T20 Wedge 7440 Socket with pigtail wires. T20 Wedge 7440 Socket with pigtail wires. Made of injected molded plastic. The wires are about 6" long, and are 18 awg stranded copper wires. Socket Size : 32 x 23mm/ 1.3" x 0.9" (D*T). Works with signal filament led or incandescent bulbs. CE and ROHS listed.
T20 Wedge 7443 Socket with pigtail wires. Made of plastic and metal materials. This socket works with 7443 led light bulbs. Since it is 7443 there are two levels of brightness bright and dim. There are three wires ground, dim and bright. CE and Rohs listed. You can use this for both 7443 dual filament or 7440 signal filament bulbs. The Socket Size : 32 x 23mm/ 1.3" x 0.9" (D*T)
T25 Socket 3156 Wedge. Approximate size is 2.16 in x 1.70 in x 1.25 in x 1.04 in. This socket comes equipped with extended ears for an easy pop in and twist installation. CE and Rohs listed. Wires about 8 inches in length. CE and Rohs listed.
Great for replacing bad or old sockets used in Tail/Brake lights. Use for custom lighting project that require a dual contact/filament bulb. Great for replacing bad or old sockets used in Tail/Brake lights.
Use for custom lighting project that require a dual contact/filament bulb. The red wire is ground. The green wire is taillight. The black wire is the brake light. The 3 wires are about 11.5" long. The wire thickness is 18 AWG. CE and Rohs.
T5 wedge socket for twist lock dashboards and other car illumination. Very small accepts a T5 bulb, then the bulb/socket is twist locked into the dashboard. This is a twist lock wedge base socket. For PC37 or PC74 please order the this socket and a T5 LED bulb. Compatible with:
L000PC74
T5 wedge with 3 4014 L.E.D. Made with Samsung LEDs for Long life up to 30 hours or longer. CE and Rohs listed. Very bright the 4014 LED chip. It is the latest SMD LED chip used for automotive electronics. Available in White, Warm white. 120 degree viewing angle. Uses about 15ma@12V DC. Up to 40 lumen output.
T5 wedge with 3 4014 L.E.D. Made with Samsung LEDs for Long life up to 30 hours or longer. CE and Rohs listed. Very bright the 4014 LED chip. It is the latest SMD LED chip used for automotive electronics. Available in White, Warm white. 120 degree viewing angle. Uses about 15ma@24V DC. Up to 40 lumen output.
T5 Wedge socket with wires. The wires are 6" long. Works great for automotive dashboards, instrument panels, and special artwork. Fits twist lock instrument cluster base. This is a female socket so a male T5 #74 T1 3/4 wedge will fit. This T5 female socket will work with standard T5 bulb number 74 incandescent light bulb. This socket works great for older classic and vintage cars, trucks and motorcycles to upgrade with new sockets. This socket is designed for a sub miniature wedge T5 bulb. This socket accepts a wedge that is 5mm wide or .196". The length of the socket is 0.700" long and the diameter is 0.380" with a lip of 0.387". The length of the wire is 5.5". This socket is for mini wedge used in cars, trucks and motorcycles, not for T5 landscape bulbs. The wire diameter is awg22 stranded. CE and Rohs. The body is made of PVC. The maximum current is: 1.46 Amps. Made for low voltages up to 24 volts.
T5 wedge socket for twist lock dashboards and other car illumination. Very small accepts a T5 bulb, then the bulb/socket is twist locked into the dashboard. This is a twist lock wedge base socket. For PC37 or PC74 please order the this socket and a T5 LED bulb. Compatible with:
L000PC74
Use this AC power cord to connect to integrated LED tube fixtures. One end has the american power plug that fits a normal wall receptacle. The other end is wires to hook up to a led tube by wire nut or screw mounting. The length of the cord is about 48 inches. The cord is white in color. the cord is rated up to 10 amps@300VAC. The cord is UL, CE and Rohs listed.
1156
- 85675 - BA15S Socket with Wire2
1157
B22 male
- 64578 - B22 Male to GZ10 Female Socket Converter3
- 89747 - B22 Male Copper Solder Base3
- 97848 - B22 male to E12 female Converter3
- 76444 - B22 Male Iron Solder Less Base Included Two Solderless Contacts3
- 60306 - B22 Male to 2xE27 Y-Shaped Female Converter Socket3
BA15D Female
- 12377 - BA15D Socket Plastic with Wires4
- 78452 - BA15D Copper Plating Solderable4
- 35523 - BA15D Female Socket With Stand and Wires4
- 94788 - BA15D Female Socket Surface Mount Stand and Wires4
- 45638 - BA15D Socket with Wires4
- 98976 - BA15D Surface Mount Socket Stand and Wires4
BA15D male
- 26553 - BA15D male to GZ10 female Converter Adapter5
- 78452 - BA15D Copper Plating Solderable5
BA15D Male To GZ10 Female
- 26553 - BA15D male to GZ10 female Converter Adapter6
BA15S Female
- 12347 - BA15S Socket with Wires7
- 85675 - BA15S Socket with Wire7
- 67456 - BA15S Socket With Stand7
- 62451 - BA15S Female Surface Mount Socket with 6" Wire7
BA15S male
- 87556 - BA15S Male Solder-able Copper Base Cap 8
BA20D Female
BA7S Female
BA7S Male
BA9S
- 69794 - BA9S Socket with Stand9
BA9S Female
- 53434 - BA9S Socket Miniature with Wire10
- 89678 - BA9S Female Socket Miniature with Solderable Tabs 10
Battery Holder Coin Cell Female 2032
BAY15D Female
- 87485 - BAY15D Socket Solder Terminals11
- 35674 - BAY15D Socket with Stand11
- 34346 - BAY15D Socket with Wires11
- 68277 - BAY15D Socket Plastic with Wires11
Cigarette Male Plug
- 54793 - Cigarette Lighter Plug Low Voltage LED Power Indicator12
E10
- 78694 - E12 male to E10 female Converter13
- 87489 - E10 male to E17 female Converter13
- 98566 - E17 male to E11 female Converter13
- 97846 - E10 male to E11 female Extender Converter13
E10 Female
E11 male
- 25113 - E11 male To E17 female Converter Lamp Holder14
- 78479 - E11 male to E14 female Converter14
- 78497 - E12 male to E26 Female Ceramic Converter14
- 84875 - E11 male to E26 female Converter Version A14
- 89765 - E11 male to E10 female Converter14
- 79462 - E11 Male Solderable Cap14
E11 Male To E12 Female
- 34543 - E11 Male Screw Base To E12 Female Screw Base Converter Adapter15
E11 Male To E17 Female
- 25113 - E11 male To E17 female Converter Lamp Holder16
E12 Female
- 89774 - E12 Screw Base Socket with Solderable Tabs17
- 85674 - E12 Female Socket17
- 87354 - E10 Screw Base Socket W/Solderable Tabs17
- 78439 - E12 Female Socket Ceramic Pigtail wires17
E12 male
- 13441 - E12 male To E12 female Extension Converter Adapter18
- 85769 - E12 male to E17 female Converter Adapter18
- 78694 - E12 male to E10 female Converter18
E12 Male To E12 Female
- 13441 - E12 male To E12 female Extension Converter Adapter19
E12 Male To E17 Female
- 85769 - E12 male to E17 female Converter Adapter20
E14 Female European
- 69865 - E14 female Surface Mount Holder Socket21
- 77456 - E14 female Socket Ceramic 250 Volt 2 Amp with Pigtail wires21
- 84556 - E14 Female Socket 250 VAC 2 Amp Ceramic21
E14 male
- 16436 - E14 male to GU10 female Converter22
- 26594 - E14 male to E11 female Converter22
- 69874 - E14 male to E17 female converter22
- 84745 - E14 male to E26 female Ceramic Converter22
- 87799 - E14 male to E10 female Converter22
- 78697 - E14 male Solder-less Copper Base Cap22
- 89867 - E14 male Solder-able Copper Base Cap22
- 62582 - E14 Male to B22 Female Socket Converter23
- 65132 - E14 Male to G9 Female Ceramic Socket Converter Adapter23
- 67616 - E14 Male to BA15D Female Converter Socket23
- 64682 - E14 Male to Two E14 Female Y Shaped Converter Socket23
E14 Male To GU10 Female
- 16436 - E14 male to GU10 female Converter24
E17 Female
- 85967 - E17 Screw Socket with Solderable tabs 25
E17 Male To 11 Female
- 26234 - E17 male To E11 female Converter26
E17 male to E10 Female Converter
- 87569 - E17 Male Solder Copper Cap27
- 26234 - E17 male To E11 female Converter27
- 68577 - E17 male to BA15D Converter Adapter27
- 97833 - E17 male to E26 female Ceramic Converter27
- 98566 - E17 male to E11 female Converter27
- 62457 - E17 male to E10 female Converter Adapter27
E17 Male To E17 Female
- 66338 - E14 female to E17 female Converter Adapter28
E17 Male To E26 Female
- 86574 - E17 male To E26 female Converter Adapter29
E26 E27 Female
- 67986 - E26-E27 female Socket F519 with Mounting Bracket30
- 84795 - Light Fixture 3 Way E27 female Wall Mount30
- 68455 - F519 E26/E27 Lamp Holder with screws30
- 75695 - E26 E27 Female Socket with Wires30
- 14132 - E26 E27 Surface Mount Fixture30
- 87874 - E26 Female Porcelain Socket with Screw Terminals 250V 660W30
- 69457 - E26 Female Ceramic Socket Hanging White Color30
- 78644 - E26 Female Socket Towel Style31
- 69788 - E26-E27 Surface Mount Socket31
- 98567 - E26 Screw Socket with Solderable Tabs31
E26 E27 Male
- 89776 - E27 Four female Lamp Holder 32
- 13444 - E27 Solderable Base32
E26 Male
- 87464 - E26 Male to USA Receptacle Female Converter Adapter33
- 68495 - E26 male to E26 Female Ceramic Adapter Extender33
- 84575 - E26 to G4 MR11 MR16 GX5.3 G6.35 Mini Bi-pin female Converter33
- 79641 - E26 male with wires Lamp Holder Adapter33
- 24163 - E26 male To R7S J Type 78 mm 3 1/8" female Converter33
- 26712 - E26 male To GZ10 female Converter Adapter33
- 69884 - E26 male to G4 MR11 MR16 GX5.3 G6.35 GX6.35 female Ceramic Adapter33
E26 Male To E12 Female
- 48343 - E26 male to E12 female Converter34
E26 Male To E17 Female
- 86774 - E26 male to E17 female Converter Adapter35
E26 Male To E26 Female
- 68495 - E26 male to E26 Female Ceramic Adapter Extender36
- 78964 - E26 male To E26 female Converter Adapter Extension36
E26 Male To G4 Female
- 84575 - E26 to G4 MR11 MR16 GX5.3 G6.35 Mini Bi-pin female Converter37
E26 Male To G5.3 Female
- 84575 - E26 to G4 MR11 MR16 GX5.3 G6.35 Mini Bi-pin female Converter38
E26 Male To G6.35 Female
- 84575 - E26 to G4 MR11 MR16 GX5.3 G6.35 Mini Bi-pin female Converter39
E26 Male To GZ10 Female
- 26712 - E26 male To GZ10 female Converter Adapter40
E26 Male To R7S Female 78mm
- 24163 - E26 male To R7S J Type 78 mm 3 1/8" female Converter41
E26 Male To USA Power Plug Female
- 87464 - E26 Male to USA Receptacle Female Converter Adapter42
E26 Male To Wires
- 79641 - E26 male with wires Lamp Holder Adapter43
E27 male
- 94561 - E27 male To R7S, J Type 189mm female Converter Adapter44
- 67432 - E26 male to E17 female Ceramic Converter44
- 84875 - E11 male to E26 female Converter Version A44
- 86723 - E26 male to GX70 female Converter Socket44
- 87698 - E26 Solder less Copper Base44
- 87988 - E26 male socket with wires44
- 69191 - E27 Male to G12 Female Ceramic Socket Converter44
- 60427 - E26/E27 Male to BA15S Female Socket Converter45
E39 Female Mogul
- 24515 - E39 Mogul Solder Base46
- 14856 - E39 Mogul Solder-Free Base46
E39 male
- 78147 - E39 male To PGZ18 female Ceramic Converter Lamp Holder47
E39 Male To GU10 Female
- 11247 - E39 male To GU10 female Converter Adapter Lamp Holder48
E5
- 65432 - T1 3/4 Midget Flanged Cap49
- 63971 - T1 3/4 Midget Grooved Cap49
E5 Midget Flanged Female
- 65432 - T1 3/4 Midget Flanged Cap50
E5 Midget Groved Female
- 63971 - T1 3/4 Midget Grooved Cap51
E5 Midget Screw Female
- 23154 - E5 Midget Screw Socket with Solderable Tabs T1 3/452
F19 Female
Festoon
Festoon Socket Female 31mm
- 64589 - Festoon Socket 31 mm53
- 32234 - Festoon Socket 31mm to 36 mm 53
Festoon Socket Female 36mm
- 32234 - Festoon Socket 31mm to 36 mm 54
Fuse Holder
- 86752 - BAC Wiring Adapter 55
Fuse Holder 6 x 30mm
- 48768 - Glass Fuse Holder 6x30 with Pigtail wires56
Fuse Holder Max Round
- 84655 - Max Round Auto Fuse Holder57
G12 Female
- 75445 - G12 Ceramic Socket 250V 4A Rated with Wires58
G12 male
- 69517 - G12 male to E26 Female Socket Converter Adapter59
G13 Female To R17D Male
- 21345 - R17D 600V 660W Converter Adapter Black (Pair)60
G13 male
G18
G23 2 Pin Male To E26 Female
- 76575 - G23 2 Pin male to E26 female Converter Adapter61
G23 4 Pin male
- 32465 - G24 2 Pin male to E27 female Converter62
G24 2 Pin male
- 32465 - G24 2 Pin male to E27 female Converter63
- 76571 - G24 4 Pin Surface Mount Socket63
G24 2 Pin Male To E26 Female
- 32465 - G24 2 Pin male to E27 female Converter64
G24 4 Pin male
- 43568 - G24 4 Pin to E26 Converter65
- 76571 - G24 4 Pin Surface Mount Socket65
G24 4 Pin Male To E26 Female
- 43568 - G24 4 Pin to E26 Converter66
G4 Female
- 45865 - G4 Ceramic Socket Lamp Holder67
- 84375 - Surface Mount Bi-Pin Socket with Wires67
- 43644 - G4 G5.3 GY6.35 Socket Lamp Holder with Wires67
G4 Female
- 45865 - G4 Ceramic Socket Lamp Holder68
G4 Female To Wires
- 45865 - G4 Ceramic Socket Lamp Holder69
G4 male
G5.3
- 68448 - G53 female Ceramic Socket with Pigtail Wires White Color70
G5.3 Female
- 84375 - Surface Mount Bi-Pin Socket with Wires71
- 43644 - G4 G5.3 GY6.35 Socket Lamp Holder with Wires71
G53 Female
- 68448 - G53 female Ceramic Socket with Pigtail Wires White Color72
G6.35 Female
- 84375 - Surface Mount Bi-Pin Socket with Wires73
- 43644 - G4 G5.3 GY6.35 Socket Lamp Holder with Wires73
G8.5 Female
- 69866 - G8.5 Ceramic Socket with Wires74
G9 Female
- 78944 - G9 female Ceramic Socket with Wires 250V 2A75
G9 male
- 54871 - G9 male to E26 female Converter76
- 78887 - G9 Male To E14 Female Low Profile76
- 87898 - G9 male to GU10 female Converter76
- 89748 - G9 male to MR16 Gx5.3 GU5.3 female Converter Adapter76
- 98867 - G9 male to E14 female Converter Adapter76
G9.5 Female socket
- 69785 - G9.5 Socket with Wires 7" Long77
GU10 Female
- 43675 - GU10 female Socket wire Wires78
GU10 male
GU10 Male To E26 Female
- 48753 - GU10 male To E26 E27 female Converter Adapter79
GU24 2 Pin Male
- 84775 - GU24 2 Pin Male to E26 Female Bulkhead Ceramic Adapter80
- 68594 - GU24 to E26 Female Converter80
- 83755 - GU24 2 Pin male to E26 female Ceramic Lamp Holder Converter80
GU24 2 Pin Male to E26 Female
- 84775 - GU24 2 Pin Male to E26 Female Bulkhead Ceramic Adapter81
- 68594 - GU24 to E26 Female Converter81
- 83755 - GU24 2 Pin male to E26 female Ceramic Lamp Holder Converter81
GU6.5 Female
- 12411 - GU6.5 female Lamp Holder with wires82
GU6.5 Female To Wires
- 12411 - GU6.5 female Lamp Holder with wires83
GX10Q 4 pin male
GX16D Female
- 65894 - GX16D female Socket Ceramic with Wires84
GX23 2 Pin Male To E26 Female
- 12353 - GX23 2 Pin to E27 Converter85
Gx23 2 Pin Surface Mount
Gx23 2 Pin Surface Mount Socket
- 68942 - Gx23 2 Pin Surface Mount Socket86
Gx24 2 Pin Male
- 67986 - E26-E27 female Socket F519 with Mounting Bracket87
- 28374 - GX24 2 Pin to E26 Converter87
Gx24 4 Pin male
GX24 4 Pin Male
- 15485 - GX24 4 Pin to E26 Converter88
Gx24 4 Pin Male To E26 Female
- 15485 - GX24 4 Pin to E26 Converter89
GX53 male
GY10Q 4 pin male
GY6.35
GZ10
GZ10 Female
- 98476 - GZ10 Ceramic Socket with Wires90
H1
H1 Female
- 45746 - H1 Socket Adapter/Converter with Pigtail Wires91
H10
H11
H12
H4
- 89798 - LED Headlight H4 Base 9-85 Volts Dual Hi/Lo Beam92
H4 Female
- 34265 - H4 HB2 9003 female Socket with Pigtail Wires93
H7
H7 Female
- 37569 - H7 Socket with Pigtail wires94
Marine
- 72685 - Two Conductor Connector Assembly for Marine Socket and Plug95
Medium Bipin
- 87548 - T8 female Tombstone G13 Retrofit Socket Shunted (Pair)96
- 94678 - T8 to T5 Oval Shape Hole length 10mm Pair96
- 68789 - T8 to T5 Oval Shape Hole Length 19mm Pair96
- 78595 - T8 Tombstone C13 Female with Metal Clip Shunted Pair96
- 84757 - T8 Tombstone C13 Female with Metal Clip Non Shunted Pair96
- 23458 - T8 female Tombstone G13 Retrofit Socket Non Shunted (Pair)96
Miniature Bipin
- 21134 - T5 female Socket Tombstone Non Shunted Bakelite (Pair)97
- 69778 - T5 female Socket Tombstone Shunted Holder (Pair)97
MR16 male
New Category
Other
- 87089 - Solder Less Bottom Cap for E26 Solder Less Copper Cap98
- 78695 - Scotch Lock Quick Connector98
P15D-3 Female
- 98578 - P15D-25-3 Base male Cap99
P15d-30 male
- 78321 - P15d-30 Cap NCNRNW100
Par 56 Female
PGJ5
Pigtail Wire
- 45865 - G4 Ceramic Socket Lamp Holder101
- 94788 - BA15D Female Socket Surface Mount Stand and Wires101
- 85675 - BA15S Socket with Wire101
R17D
R17D Female
R17D Male To G13 Female
- 21345 - R17D 600V 660W Converter Adapter Black (Pair)102
R7S 118mm
R7S 135mm
R7S 189mm
- 94561 - E27 male To R7S, J Type 189mm female Converter Adapter103
- 78977 - R7S T3 Jtype 15 Watt 189 mm Dim-able 120 VAC 360 Degree 103
R7S 78mm
R7S RX7S Female 118mm
- 86576 - R7S female 118mm socket with wires104
R7S RX7S Female 189mm
- 94561 - E27 male To R7S, J Type 189mm female Converter Adapter105
- 86866 - R7S female 189mm socket with wires105
R7S RX7S Female 254mm
- 78442 - R7S female 254mm socket with wires106
Recessed Double Contact R17D Female
- 78998 - T8 Tombstone R17D Retrofit Socket Shunted Matched Pair107
- 87484 - T8 Tombstone R17D Female Retrofit Socket Non Shunted Matched Pair107
S14D Female
- 89777 - S14D female base Wall Surface Mount Socket108
S14D male
- 89777 - S14D female base Wall Surface Mount Socket109
S14S Female
- 84766 - S14S Female Surface Wall Mount Socket Pair110
S14S male
- 84766 - S14S Female Surface Wall Mount Socket Pair111
S25
Screw Terminals
Single Pin Female
- 96784 - T8 Tombstone Retrofit Socket Single Pin Matched Pair112
T10
T10 Wedge Female
- 11312 - T10 Wedge Socket Rubber Black 6 Inches Wire113
- 89723 - T10 Wedge Socket with Wires113
- 12413 - T10 Wedge Socket Twist Lock113
- 24151 - Socket T10 Wedge Plastic Black 6 Inches Wire113
T12 male
T15
T15 Wedge Female
- 86745 - T15 Socket for T15 Wedge114
T19
T19 Female
- 14513 - T19 Socket Rubber and Wires115
T20
T20 7440 Wedge Female
- 48754 - T20 Socket for T20 Wedge 7440 with Wires116
T20 7443 Wedge Female
- 78456 - T20 Socket for T20 Wedge 7443 Socket with Wires117
T25
T25 3156 Wedge Female
- 31264 - T25 Socket 3156 Wedge with Wires118
T25 3157 Wedge Female
- 59786 - T25 Socket for T25 Wedge 3157119
T5 mini wedge
- 12331 - T5 female socket Miniature Wedge Twist Lock Black120
- 78489 - Miniature Wedge T5 3 4014 SMD LED Bulb T1-3/4 12 VDC120
- 87476 - Miniature Wedge T5 3 4014 SMD LED Bulb T1-3/4 24 VDC120
T5 miniature bi-pin
T5 Wedge Sub Miniature Female
- 13034 - T5 Wedge Socket With 6 Inches Wire T1 3/4 121
- 12331 - T5 female socket Miniature Wedge Twist Lock Black121
T8 male
USA Power Plug
- 71545 - AC Power Cord 3 Stranded wires for T5 or T8 Tubes White122
